This test bench is mainly used to dynamically measure the front wheel side slip of an automobile and judge whether it is abnormal. WGCH-3F/10F/13F/13FS is suitable for all types of automobiles with axle load mass not more than 3000/10000/10000/13000/13000kg.
This test bench is mainly used to dynamically measure the front wheel side slip of an automobile and judge whether it is abnormal. WGCH-3F/10F/13F/13FS is suitable for all types of automobiles with axle load mass not more than 3000/10000/10000/13000/13000kg.
Research and development basis
1. JT/T 507-2004 Automobile Side Slip Inspection Platform
2. JJG908-2009 Verification Regulation of Automobile Side Slip Inspection Platform
Technical characteristics
The products are designed, manufactured and inspected according to JT/T507-2004 "Automobile Side Slip Inspection Platform".
The products meet the national standard GB 21861-2014 "Items and Methods of Motor Vehicle Safety Technical Inspection".
The surface of the equipment adopts comprehensive spraying technology, with simple and elegant appearance, corrosion resistance and high hardness.
The whole welding technology is adopted, and the stress is relieved by special instruments, so the structure is stable and firm, and it is not easy to deform.
The control acquisition system is integrated and embedded, with reasonable structural design, convenient maintenance and installation, standard communication interface and convenient networking.
Double-plate linkage sideslip table has mature technology, advanced manufacturing technology, double-plate linkage structure and good test synchronization.
The transmission parts are specially hardened, with high strength and wear resistance.
Products sell well at home and abroad and can work reliably and stably for a long time.
With a 300mm release plate, the wheel passes through the release plate before driving on the side skateboard to eliminate the inward or outward side slip force between the wheel and the ground.
With standard communication interface, it is convenient for equipment networking.
technical parameter
| model | WGCH-3F | WGCH-10F | WGCH-10FS | WGCH-13F | WGCH-13FS |
| Maximum bearing mass kg | 3000 | 10000 | 10000 | 13000 | 13000 |
| Double steering axle measuring device | — | — | have | — | have |
| Range range m/km | -15~+15 | -15~+15 | -15~+15 | -15~+15 | -15~+15 |
| Indication error(m/km) | ±0.2 | ±0.2 | ±0.2 | ±0.2 | ±0.2 |
| Synchronization error(mm) | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 |
| Skateboard size L×B， mm | 1100×1000 | 1100×1000 | 1100×1000 | 1100×1000 | 1100×1000 |
| Relaxation plate size L×B， mm | 1100×300 | 1100×300 | 1100×300 | 1100×300 | 1100×300 |
| Test vehicle track (inner width × outer width)mm | 700×2900 | 700×2900 | 700×2900 | 700×2900 | 700×2900 |
| outline dimension l×b×h，mm | 3400×1436×180 | 3400×1436×180 | 3400×1436×180 | 3400×1436×180 | 3400×1436×180 |
| structural style | Frame welding | Frame welding | Frame welding | Frame welding | Frame welding |
Leave your contact information, and our engineers will help you find the solution you are looking for.
Motorcycle safety performance testing equipment is used to test motorcycle wheel (axle) weight, speedometer accuracy, braking performance and wheel deflection. Friction inspection equipment is suitable for two-wheeled, three-wheeled and three-wheeled motorcycles that meet the following table.
KNOW MORE
Handheld terminal installed with relevant mobile application software, which is specially used for motor vehicle inspection or motor vehicle safety technical inspection.
KNOW MORE
Product introductionWGDP-10/13/15 automobile suspension steering system clearance tester (hereinafter referred to as product) is used to check the clearance between automobile suspension system and steering system matching parts. This product is suitable
KNOW MORE
Functional useThrough the intelligent measuring device, the three-dimensional image of the vehicle profile and the comprehensive monitoring data of length, width, height, container rail height, wheelbase and pin wheelbase are obtained. For the semi-trailer type, the tractor and the trailer can pass through the system together, and the relevant information of the tractor and the trailer can be measured
KNOW MORE
Product introductionThe automobile suspension device inspection table (hereinafter referred to as the suspension table) can carry out the following tests on automobile suspension devices with axle weight less than 3 t:
KNOW MORE
Automobile 4-in-1 testing equipment is specially designed to meet the requirements of automobile 4S stations, maintenance service centers, small automobile testing stations, bus passenger stations, teaching and scientific research units, etc. It occupies less land, has high testing accuracy and simple operation, and is widely used in automobile repair shops, 4S shops, etc.
KNOW MORE
Automobile three-in-one testing equipment is specially designed to meet the requirements of automobile safety performance index testing in automobile 4S stations, maintenance service centers, small automobile testing stations, bus passenger stations, teaching and scientific research units, etc. It occupies less land, has high testing accuracy and simple operation, and is widely used in automobile repair shops and 4S shops.
KNOW MORE
Product introductionThis wheel gravimeter is used to measure the wheel mass, axle load mass and vehicle mass. Can be used independently, and can also be used for on-line use of automobile detection lines. LZ-3B/10B/13B wheel weight tester is suitable for two-axle vehicles with wheel weights
KNOW MORE
This test bench is mainly used to dynamically measure the front wheel side slip of an automobile and judge whether it is abnormal. WGCH-3F/10F/13F/13FS is suitable for all types of automobiles with axle load mass not more than 3000/10000/10000/13000/13000kg.
KNOW MORE The automobile flat-panel testing platform is suitable for testing vehicles with the maximum dynamic weight of a single axle not exceeding 10000kg. On the flat-panel simulating the actual flat road, the automobile runs at a certain speed, implements braking, and dynamically measures the braking force, axle load
KNOW MORE
ZD-3BW/10BW, ZD-10DW/13DW, ZD-18BW, ZD-18DW series automobile loading and braking test stands are mainly used for testing automobile braking performance under rated load quality, and can detect the braking force sum and braking force difference (maximum process difference) of each axle of the automobile;
KNOW MORE
Drum-type automobile speedometer inspection platform (hereinafter referred to as speedometer). It is mainly used to test the accuracy of automobile speedometer. Model SD-3/10A/13A and B speedometer are suitable for all types of cars with axle loads not more than 3 000, 10 000 and 13 000㎏.
KNOW MORE
ZD-3BW/10BW, ZD-10DW/13DW, ZD-18BW, ZD-18DW series automobile loading and braking test stands are mainly used for testing automobile braking performance under rated load quality, and can detect the braking force sum and braking force difference (maximum process difference) of each axle of the automobile;
KNOW MORE
Drum-type automobile speedometer inspection platform (hereinafter referred to as speedometer). It is mainly used to test the accuracy of automobile speedometer. Model SD-3/10A/13A and B speedometer are suitable for all types of cars with axle loads not more than 3 000, 10 000 and 13 000㎏.
KNOW MORE
Let s talk! We’ll provide the perfect solution for you！
The products provided by Henan Wanguo Technology Co., Ltd. are all developed and produced in accordance with relevant national standards, with strict control and quality inspection. Unqualified products will never leave the factory.
Long Ding Chuangfu Center, High-tech Zone, Zhengzhou City, Henan Province
