The equipment can pump and discharge fuel from the hole at the bottom of the plastic oil tank through the hole punch, and is equipped with two sets of pumps, which are used to recover gasoline and diesel respectively; The special drilling bit is safe and efficient.
Product features
The equipment can pump and discharge fuel from the hole at the bottom of the plastic oil tank through the hole punch, and is equipped with two sets of pumps, which are used to recover gasoline and diesel respectively; The special drilling bit is safe and efficient. The overall appearance design is simple, easy to operate and conforms to the ergonomic gun head design. The tank body groove type gun head recovery tank is easy for daily operation and beautiful as a whole. (Supporting recycling tank)
technical parameter
| Performance parameters of fuel discharge drilling system | |||
| serial number | project | parameter | unit |
| 1 | Equipment size | 1000*700*2000 | mm |
| 2 | Air source pressure | 0.8 | Mpa |
| 3 | Maximum pumping capacity | 114 | L/min |
| 4 | Maximum outlet pressure | 7 | 7bar |
Leave your contact information, and our engineers will help you find the solution you are looking for.
1. The annual disassembly is about 15,000 (70 meters long, 10 meters wide and 6 meters high), which can be customized according to the actual situation of customers.
KNOW MORE
Including a set of remote detonator, detonation box, storage battery and rechargeable battery, which can detonate the airbag remotely or regularly. The product consists of two modules: controller and detonator. The two modules are connected wirelessly. The maximum distance of wireless connection is 15M.
KNOW MORE
Product introduction1. Semi-automatic swing arm and single tire pressing auxiliary arm.2. Suitable for automobiles, motorcycles and light trucks.
KNOW MORE
Refrigerant from scrapped automobiles can be recovered by this device, and the following refrigerant models can be recovered by classification: R-12, R22, R-134a, R-401a, R401b, R401c, R402a, R402b, R404a, R406a, R407a, R407b, R407c, R407d, R408a and R409a.
KNOW MORE
The equipment can pump and discharge fuel from the hole at the bottom of the plastic oil tank through the hole punch, and is equipped with two sets of pumps, which are used to recover gasoline and diesel respectively; The special drilling bit is safe and efficient.
KNOW MORE The equipment is equipped with special working heads and tools to pump and drain engine oil, brake oil, cooling water, glass water, brake cylinder oil and shock absorber oil respectively, and the oil drainage rate of the whole vehicle is as high as over 90%. It is equipped with ergonomic gun head air pump switch, which supports electric and automatic modes.
KNOW MORE
The equipment is designed without foundation, which is easy to install, does not need foundation engineering in the early stage, adopts integral design, has a simple and elegant appearance, and adopts double hydraulic systems to ensure the safety of the operation process. The control is simple, the equipment can be controlled to rise and fall on the main control cabinet,
KNOW MORE
The equipment is designed without foundation, which is easy to install, does not need foundation engineering in the early stage, adopts integral design, has a simple and elegant appearance, and adopts double hydraulic systems to ensure the safety of the operation process. The control is simple, the equipment can be controlled to rise and fall on the main control cabinet, and the operator can quickly judge the running position of the equipment.
KNOW MORE
The overturning device can overturn the operating vehicle vertically by 90 degrees, so that the operator can disassemble the vehicle chassis parts more safely and quickly. At the same time, it is equipped with a three-cylinder synchronous clamping device and a pressure sensor
KNOW MORE
1, space saving, high efficiency and no need for turnover.2, the staffing requirements are low, and single-station personnel can complete all disassembly procedures.3, the degree of refinement is high, and the demand for high-standard recycling of auto parts is guaranteed.
KNOW MORE
Serial number project parameter unit1 specification of charging port (length x width x working height) 6500 * 2500 * 2000mm.2 nominal pressure of 2450 KN.3 The pressing stroke is 1900 mm
KNOW MORE
Serial number project parameter unit1 specification of charging port (length x width x working height) 6500 * 2500 * 2000mm.
KNOW MORE
Lifting and overturning integrated machine
KNOW MORE
Germany Lukas handheld hydraulic shears
KNOW MORE
Let s talk! We’ll provide the perfect solution for you！
The products provided by Henan Wanguo Technology Co., Ltd. are all developed and produced in accordance with relevant national standards, with strict control and quality inspection. Unqualified products will never leave the factory.
Long Ding Chuangfu Center, High-tech Zone, Zhengzhou City, Henan Province
